Motor Health Checks: Inspecting bearings, excessive noise, balanced phase amperage, excessive load, and cooling fans to prevent burnout.
Vibration Analysis: Checking for misalignments in rotating equipment before they cause mechanical failure.
Belt & Drive Tensioning: Adjusting or replacing drive belts between motors and machinery.
Contact Re-tensioning: Tightening terminal screws in vibrating machinery to prevent arcing or heat damage.
Motor Replacement: Faulty motors srviced with new bearings or replaced.
Electrical Faults: Fault finding on the electrical control Panels why the machinery won't start or does not operate correctly. Replacing faulty components. 3-phase and single-phase. Electrical drawings a big help.
Electrical Spare Parts and components: All electrical components required can be sourced locally and internationally.

Control Panel Refresh: Checking that all indicator lights, emergency stops, and "Reset" buttons are functional. Replacing faulty components.

Seal & Gasket Inspection: Identifying and replacing weeping seals on irrigation, transfer or process pumps.
Pressure Switch Calibration: Ensuring pumps operate at the correct pressure settings. Test switching pressures
Level Switch Servicing: Testing and cleaning level sensors in sumps or water tanks.
Hydraulic systems: Fault finding on the system to locate problematic solenoid valves, cylinders, and pumps.
Pneumatic systems: Fault-finding on pneumatic systems. Replace faulty solenoid valves, cylinders, pressure regulators, and lubrication systems where required.
Spare parts: Supply of all pneumatic and hydraulic spare parts, including cylinders, solenoid valves, pressure regulators, lubricators, and pneumatic fittings.

Design and build of new control panels for small machines.

New Control panels: Design and build of new control panels for small machines. Sar/ Delta/ DOL, Soft Start/ VFD's
Small Automations: Automation of small machines using Delta Plc's. Build of Control Panels. Installation and commissioning.
Electrical Spare Parts and components: All electrical components required can be sourced locally and internationally.

Control Panel Refresh: Checking that all indicator lights, emergency stops, and "Reset" buttons are functional. Replacing faulty components.

Industrial/ factory/ Farm services offered

Industrial Plug & Socket Repair: Replacing cracked or heat-damaged 3-phase and heavy-duty connectors and plugs.
Enclosure Cleaning: Removing dust and debris from electrical cabinets and DB boards to prevent overheating and shorting of electrical components. Neatening of wiring in control panels
Conduit & Trunking Repair: Re-securing loose cable runs. Replace all missing trunking covers. Reposition all loose hanging wiring in the control panel, back in the trunking, and replace and reposition the trunking covers. Neaten the panel as far as possible, back to OEM standard

Battery Bank Maintenance: Checking batteries and terminals for corrosion and loose connections. for backup power systems or electric gate batteries.
HVAC & Fan Servicing: Cleaning intake louvers and greasing bearings on large-scale ventilation or extraction fans.
Compressor Maintenance: Draining moisture from air tanks and checking oil levels in gearboxes and compressors. Check dryer filters are clean and serviced.
Control Panel Refresh: Checking that all indicator lights, emergency stops, start, stop and Reset buttons are functional. Replace faulty components.

Connectivity Troubleshooting: Diagnosing why devices are dropping signal or experiencing slow speeds.
Hardware Reboots: Proper power-cycling of existing modems and routers to clear cache errors.
Firmware Updates: Ensuring your current router is running the latest security patches.
Cable Management: Tidying up messy "spaghetti" wiring behind desks or media consoles.
WiFi Optimization: Adjusting the placement or settings of existing equipment to improve coverage.
Ethernet Cable testing: Test cables for data transmission, Breaks and faults.
Replace faulty Ethernet cables